Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across North Tustin
A new driveway gate in North Tustin typically runs $4,800 to $14,500 installed, depending on whether you’re replacing a single swing gate or building a double security gate with automation. Most installations take two to three days from concrete pour to final programming. If you’re calling from a North Tustin hillside lot, call (760) 852-5601 and we’ll schedule a free measure and give you a written price before any work starts. That price is agreed before a single bolt is turned, and it’s protected by our 90-Day Done Right Promise.
North Tustin is not Tustin. That’s the first thing a homeowner here needs to know when planning gate work. The unincorporated foothill neighborhoods, the equestrian parcels off Newport Avenue, the larger estate lots along Foothill Boulevard, all fall under Orange County Building & Safety for permits, not Tustin City Hall. We handle OC permits on gate installations every month, and we know the difference. It saves our customers real time and real money.
Why Ironworks Gate Co. Is North Tustin’s Preferred Gate Installation Company
We’ve been building and hanging gates for over 42 years, and the work North Tustin throws at us is different from what we see down in the flats. These are older iron gates on buried concrete footings, hung on homes built from the 1960s through the 1990s, on half-acre lots and horse properties where the clay-heavy soil moves more than anyone expects. Decades of that movement causes post lean and gate sag that a hinge adjustment alone will never fix. We re-pour footings. We re-set posts. And we re-hang the gate so it clears the driveway like it did the day it was first hung.
Our Gate Installation team works in North Tustin every week. We know which operators hold up to the Santa Ana winds that funnel through the local canyons and which ones fail by their third wind season. We know which Jacuzzi Family Vineyard-adjacent parcels need deeper footings because of the clay, and which older swing gates on Panorama Heights still have safe, salvageable steel under the surface rust. That local knowledge means our quotes are accurate and our work holds.
When you call, a live person answers. 24 hours a day, 7 days a week. Not a voicemail tree, not a call center. You’ll talk to someone who knows gates. We’ll schedule a time to measure, write you a firm price, and tell you exactly what the permit will require under North Tustin jurisdictions. Victor Salinas leads our crews, and every tech who steps onto your property is background-checked, uniformed, and held to our K.E.Y.S. code: Krafted right, Every time, Your home first, Standing behind it.
Key Takeaways for North Tustin Homeowners
- Gate permits in North Tustin go through Orange County, not the City of Tustin
- Post lean and gate sag from clay-heavy foothill soil usually requires re-pouring footings, not just hinge work
- Santa Ana wind gusts over 60 mph demand reinforced hinge posts and properly rated operators
- Pre-UL 325 gate operators with dead control boards are often cheaper to replace than retrofit
- Every job is covered by our written 90-Day Done Right Promise
Our Gate Installation Services in North Tustin
Swing Gate Installation
Swing gates are the most common style on North Tustin’s older estate properties. A single ornamental iron swing gate here runs $4,800 to $8,900 installed. Double swing gates, popular on the wider driveways off Cowan Heights and Lemon Heights, run $7,500 to $14,500 depending on width, ironwork, and whether you’re adding automation. We pour deeper footings than code minimums on these jobs because the clay-heavy soil movement in the foothills is a real, ongoing force.
Double Gate Installation
Double gates on multi-acre North Tustin parcels handle more wind load and more daily cycles than a single gate ever will. We hang both leaves with reinforced steel posts and matched operators so they open and close in sequence without lag. On properties with horses, we also set the gate height and latch spacing to keep animals from nudging through. A custom double gate with automation typically starts around $8,000 and goes up based on ironwork and driveway width.
Sliding Gate Installation
Sliding gates make sense on North Tustin driveways with steep approach grades or where a swing arc would cut across a slope. We install cantilever and V-track slide gates, and we replace old chain-driven systems with modern rack and pinion hardware. A slide gate on a long, sloped North Tustin driveway runs $6,500 to $12,000 installed, including the operator and safety photocells. These gates hold their alignment better in wind corridors than swing gates of the same size.
Pedestrian Gate Installation
Pedestrian gates service the side-yard entrances and rear access points on North Tustin horse properties and pool areas. We hang them to match the main driveway gate in style and finish. A custom ornamental iron pedestrian gate with hardware runs $2,200 to $4,800 installed. If you need a security gate with keypad or intercom access, we can tie it into your existing entry system.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in North Tustin
We’re certified on nine major gate-automation brands, including LiftMaster, DoorKing, and Elite. That matters in North Tustin because no two properties have the same opener. We see LiftMaster on at least half the older estate gates here, DoorKing on the commercial-style slide gates, and Elite on mid-range residential installs from the early 2000s. When a control board fails or a limit switch goes, we carry parts on the truck for these brands and can usually complete the repair the same day. For full installations, we’ll recommend the operator that matches your gate’s weight, cycle rate, and wind exposure, and we’ll explain why in plain English.
Common Gate Installation Problems We See in North Tustin Homes
- Post lean and gate sag from clay-heavy soil. The foothill terrain in North Tustin expands and contracts with rain and drought. Older gates on original footings develop a lean that drags the gate leaf across the driveway. Hinge shims buy a few months. Re-pouring the footing and re-setting the post is the fix that lasts.
- Santa Ana wind damage to hinges and weld joints. Gusts funneling through the Santa Ana Mountains routinely exceed 60 mph here. That repeated force racks the hinge geometry, shears weld joints at the post, and knocks operators out of alignment. We reinforce hinge posts and specify wind-rated hardware on every North Tustin install.
- Obsolete control boards on pre-UL 325 operators. Many North Tustin gates were automated in the 1990s and early 2000s. Those operators predate modern entrapment protection standards. When a control board dies on a 20-year-old unit, replacement parts are often discontinued or priced close to a full operator swap. We’ll tell you honestly when a new operator with current safety sensors is the cheaper answer.
- Fine silica dust wearing out gears and latch mechanisms. Santa Ana winds carry fine dust from the foothills into operator gears and latch assemblies. That grit accelerates wear far faster than in coastal Orange County cities like Newport Beach or Fountain Valley. We recommend seasonal cleaning and lubrication, and our $89 Seasonal Tune-Up includes gear inspection and latch service.
Pricing for Gate Installation in North Tustin, CA
Here’s what North Tustin homeowners can expect to budget for a new gate installation in 2026:
- Single swing gate, ornamental iron: $4,800 to $8,900 installed
- Double swing gate with automation: $7,500 to $14,500 installed
- Sliding gate with rack and pinion operator: $6,500 to $12,000 installed
- Pedestrian gate, matching driveway style: $2,200 to $4,800 installed
- Post and footing replacement on existing gate: $1,500 to $3,200 per post
What affects the price: gate width and weight, ironwork complexity, whether the existing footings can be reused, and the operator brand and safety features you choose. We quote a firm price up front, after measuring on site. You approve that number before work starts. Nobody hands you a bigger bill at the end. Estimates are free, and we’ll walk you through the OC permit costs line by line so there’s no surprise at the Building & Safety counter.
We Also Serve Cities Near North Tustin
Our crews work throughout central Orange County. If you’re in Newport Beach, Fountain Valley, Laguna Woods, or Aliso Viejo, we can schedule a free measure the same week. Each city has its own permit quirks, and we handle those details so you don’t have to chase paperwork. Call (760) 852-5601 and tell us where you’re calling from.
Serving North Tustin, CA - Our Local Coverage Area
We’re based in the North Tustin area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in North Tustin
Yes, you typically need a permit through Orange County Building & Safety, not the City of Tustin, because North Tustin is unincorporated county territory. Any structural gate work, including new posts and footings or a gate over 7 feet tall with a powered operator, triggers plan review. We pull those permits for you as part of the installation and include the fees in your written quote. Call (760) 852-5601 and we’ll tell you exactly what your specific gate requires.
Usually we can re-set the post and re-pour the footing and save the gate, if the steel is still sound. North Tustin’s clay-heavy soil moves seasonally, and that movement is what causes the post to lean. We dig out the old footing, pour a deeper one with proper drainage gravel, re-set the post plumb, and re-hang the gate. If the gate frame itself has cracked welds or severe rust-through at the hinge stiles, we’ll show you the damage and give you a straight recommendation. Call for a free assessment.
Sometimes, but often not. On pre-UL 325 operators from the 1990s and early 2000s, control boards are frequently discontinued, and even when you find one, it won’t bring the gate up to current entrapment protection standards. A new LiftMaster or DoorKing operator with current safety photocells and obstruction sensing usually costs $1,800 to $3,800 installed depending on the gate type, and it’s covered by our 90-Day Done Right Promise. We’ll show you both options in writing before you decide.
We install wind-rated hardware and reinforced hinge posts on every North Tustin gate. That means heavier gauge steel at the hinge stiles, through-bolted hinges instead of surface welds, and operators sized above the minimum for your gate’s weight and wind exposure. On existing gates that keep drifting, we can add wind stiffeners to the gate frame and check the operator’s force limits so it isn’t fighting against itself. Call (760) 852-5601 and we’ll come out and assess what your gate specifically needs.
Yes. We replace chain-driven slide gates with modern rack and pinion hardware regularly on North Tustin properties. Rack and pinion runs cleaner, needs less maintenance, and holds alignment better on sloped driveways and in wind corridors. The upgrade typically runs $6,500 to $12,000 installed, depending on gate size and the operator you choose. We’ll quote the full job in writing before any work begins.
Written by Victor Salinas, Owner at Ironworks Gate Co., providing gate installation services to North Tustin and surrounding Orange County communities for over 42 years.